Hi,
like Paul I am trying to create a bootable SD-Card from scratch for
my TS-7800 without any success.
If I can't create my own SD-Cards there's not much I will be able to
do with my TS-7800.
Any help out there ?
--- In Paul Wachendorf <> wrote:
>
> Hi,
> I have an TS-7800. I tried to create an bootable Sdcard, and
therefor
> created the following partitions:
> /dev/tssdcardb1 4Mb
> /dev/tssdcardb2 4Mb
> /dev/tssdcardb3 4Mb
> /dev/tssdcardb4 rest of the card
>
> I left partition1 empty, copied the Kernel image on the 2nd,
busybox
> initrd on the 3th and an debian system on the 4th, but booting
didn't work:
> When I wrote exit in the fastboot shell, the system made a fallback
boot
> on /dev/mtdblock3. So I just wanted to have a look at the mtdblock
> patitions to examine that I did wrong. Mounting of /dev/mdtblock1
was a
> bad Idea. It only showed me an lost+found folder and obviously
crashed
> the kernel image, cause booting now crashes with the message:
> !00000354!00000487!00000072!000007bc!00000567>> flash ECC error!
> Setting Jumper 1 to boot from sdcard just gives a
> >> TS-BOOTROM - built Oct 4 2007
> >> Copyright (c) 2007, Technologic Systems
> and than hangs. So I think there is something wrong with the kernel
> image. Was It right just to copy the vmlinux file
to /dev/tssdcard2? Or
> should I use dd?
> Please help me.
> Thanks,
>
> Paul
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|