On Tue, 23 Oct 2007, rogerb01 wrote:
> Thanks for responding, Jim.
> I have tried your program and yes, it can change the clock rates
> just fine. However I get an I/O error when trying to turn the
> ethernet I/F on/off.
Ah. So that is ts7200 specific then. It certainly works on 7200.
> I'll try to get hold of Technologic tech support to find out if they
> have a shell to do this or have any documentation. I did not see
> anything in any of the documentation I've looked at on their site.
> I've tried toggling bit2 (allegedly the phy power control bit) in
> the power management register but nothing seems to happen.
code?
>
> > HomePage: http://www.comp.leeds.ac.uk/jj
> > TS7200 Page: http://www.comp.leeds.ac.uk/jj/linux/arm-sbc.html
> >
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|