[ts-7000] Re: FrameBuffer

["bibhu" <>]

Hi Peter,

What would be the simplest way to invert the image we are displaying ?
Instead of printing line by line, I tried storing writelen in a bigger array and then wrote it to fp_out. However, this gave me two images instead of one. It replicated the image. The height and width basically were halved.
The image was straight though.

Thanks,

Bibhu

--- In "bibhu" <> wrote:
>
> Peter,
>
> That would be great. Others could use the manual too!!!
> Even I was thinking of plugging in a USB keyboard. :)
>
> Bibhu
>
> --- In "PeterElliot" egroups@ wrote:
> >
> > Bibhu,
> >
> > With regard to the 800x600, on the latest version of the SD card
> > (available on the TS ftp site) there are two FPGA files, the
> startup
> > is configured by default to load the 640x480 version, but by
> > modifying the startup script to load the other you can change the
> > resolution. If you want I'll look at writing a step-by-step guide
> > (again in my extremely limited free time!).
> >
> > As regards using the screen, I plugged a USB keyboard (I chose a
> MAC
> > keyboard for aesthetics) int! o the 7300 and can use it like an old
> DOS
> > PC. I've not played around with any of the X-window or other such
> > systems as for my application I wrote everything that I needed from
> > scratch!
> >
> > Regards,
> >
> > PJE
> >
> > --- In "bibhu" <bibhu_420@> wrote:
> > >
> > >
> > > Peter,
> > >
> > > Yeah, that would be good. I think I will change your code to do
> it.
> > > Any image upto 800 X 600 should be handled then.
> > >
> > > With respect to one of your replies:
> > >
> > > How do I change "which FPGA file loads on boot to select
> 800x600" ?
> > > My display can handle 800 X 600.
> > >
> > > Also, when TS7300 boots, I get to to see their logo and the login:
>! ; > > on my external monitor.
> > > Why don'! t I see anything after that? It would be nice if I could
> get
> > > rid of my terminal emulator, SSH.
> > >
> > > Bibhu
> >
>

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___