Bibhu,
With regard to the 800x600, on the latest version of the SD card
(available on the TS ftp site) there are two FPGA files, the startup
is configured by default to load the 640x480 version, but by
modifying the startup script to load the other you can change the
resolution. If you want I'll look at writing a step-by-step guide
(again in my extremely limited free time!).
As regards using the screen, I plugged a USB keyboard (I chose a MAC
keyboard for aesthetics) into the 7300 and can use it like an old DOS
PC. I've not played around with any of the X-window or other such
systems as for my application I wrote everything that I needed from
scratch!
Regards,
PJE
--- In "bibhu" <> wrote:
>
>
> Peter,
>
> Yeah, that would be good. I think I will change your code to do it.
> Any image upto 800 X 600 should be handled then.
>
> With respect to one of your replies:
>
> How do I change "which FPGA file loads on boot to select 800x600" ?
> My display can handle 800 X 600.
>
> Also, when TS7300 boots, I get to to see their logo and the login:
> on my external monitor.
> Why don't I see anything after that? It would be nice if I could get
> rid of my terminal emulator, SSH.
>
> Bibhu
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|