Peter,
How do I change "which FPGA file loads on boot to select 800x600" ?
My display can handle 800 X 600.
Also, when TS7300 boots, I get to to see their logo and the login:
on my external monitor.
Why don't I see anything after that? It would be nice if I could get
rid of my terminal emulator, SSH.
Bibhu
--- In "PeterElliot" <> wrote:
>
> Hi Bibhu,
>
> You only need to pad the width. You can load images that are less
> than full screen height directly into the frame buffer (this is
what
> Technologic Systems do for the logo on powerup), but it needs to be
> the same width as your display.
>
> I would recommend moving to 800x600 for the screen resolution -
> unless your display can't handle the resolution - as it makes the
> display crisper. All you would need to do is change which FPGA file
> loads on boot to select 800x600.
>
> Regards,
>
> PJE
>
> --- In "bibhu" <bibhu_420@> wrote:
> >
> > Hi Peter,
> >
> > My screen resolution changes to 640 X 480 when I connect it to
> TS7300.
> > I will change maxwidth and maxheight in MakeImgs.c to 640, 480
> > respectively. I will modify your code so that it pads it with
blank
> > space(ASCII 32) if image size is less than 640, 480.
> >
> > Lets see how it goes.
> >
> > Thanks & Regards,
> >
> > Bibhu
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|