ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: Qt Sample Code?

To:
Subject: Re: [ts-7000] Re: Qt Sample Code?
From: Eddie Dawydiuk <>
Date: Wed, 19 Sep 2007 15:22:57 -0700
Hello,

>    3) why doesn't it allow use of all 60 lines of text?  (It only
>       seems to support the top 40 of an 80x60 display for either
>       the console or ncurses.)  TS didn't know when we asked, and
>       then they asked us to provide them with sample code to test
>       the issue...

Hmm, this must be Steven... I've been working with your co-worker Butch 
providing support for the problems he has been reporting with regard to 
the TS-7KV. I was unable to reproduce his problems as reported. As a 
result I asked him to provide sample code to demonstrate the problem. 
Even with his sample code I was still unable to reproduce the problem he 
reported. I wrote him an email yesterday at 2:54 PM. Seeing as though I 
have not received a response yet from him maybe you can respond...

e.g.

"I can't reproduce this. When I boot up I see 80x30 characters, the 
kernel messages also report 80x30 characters. When I run your ncurses 
app I still see 80x30 characters. To ensure there is not a communication 
problem I am booting to a TS-7200 I am connecting a monitor to the VGA 
connector on a TS-7KV. I log in via a USB keyboard and verify 80x30 
characters, I then ran your ncurses app and it also showed 80x30 
characters. I typed dmesg and saw the kernel reported 80x30 characters. 
Am I doing something differently than you are?"

In case you don't have the sample app Butch sent me the app is available 
here.

ftp://ftp.embeddedarm.com/tmp/nctest.c  //source
ftp://ftp.embeddedarm.com/tmp/nctest    //binary

-- 
Best Regards,
________________________________________________________________
  Eddie Dawydiuk, Technologic Systems | voice:  (480) 837-5200
  16610 East Laser Drive Suite 10     | fax:    (480) 837-5300
  Fountain Hills, AZ 85268            | web: www.embeddedARM.com


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU