ts-7000
[Top] [All Lists]

[ts-7000] TS-PLC update

To:
Subject: [ts-7000] TS-PLC update
From: "Michael Schmidt" <>
Date: Wed, 5 Sep 2007 16:35:29 -0700 (MST)
For those who are interested in our new TS-PLC product, I've put up a few
pages to give you an idea of what the software looks like for this
product:

http://oz.embeddedarm.com/~michael/ladder.html

This link points directly to the ladder logic editor, and hopefully will
give you an idea of how it works.  This page will normally run off the
TS-PLC-CONTROLLER; since oz is not a TS-PLC-CONTROLLER, some parts of the
page will be non-functional (such as loading and saving programs,
committing them to the TS-PLC devices, etc.).  However you should be able
to play around with the editor and create some ladder logic, as well as
access the manual which is here:

http://oz.embeddedarm.com/~michael/help.html

Feedback anyone?

Thanks,

Michael




               _________
      Michael /   _____/chmidt        michael AT embeddedArm DOT com
              \_____  \               16610 East Laser Drive #10
              /        \              Fountain Hills, AZ 85268
 Technologic /_______  /ystems        (480) 837-5200
                     \/





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU