[ts-7000] ts-7300 DIO1

To:
Subject:	[ts-7000] ts-7300 DIO1
From:	"m e cel" <>
Date:	Wed, 05 Sep 2007 08:29:31 -0000

Hi all.


I am a newbie for 7300. I want to use digital I/O 1 header. I set up 
the registers DDR and DR of port B and I set the port as output.
I load zero to DR register I see 0x1F when I read the port.


How can I solve this problem?






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] ts-7300 DIO1, m e cel <= Re: [ts-7000] ts-7300 DIO1, David Hawkins

Previous by Date:	[ts-7000] USB load on CPU, Michael Malak
Next by Date:	[ts-7000] Re: Rugged connection with usb device onto ts-7400?, charliem_1216
Previous by Thread:	[ts-7000] ts-7400 and linux 2.6.x kernel?, Bas Schulte
Next by Thread:	Re: [ts-7000] ts-7300 DIO1, David Hawkins
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU