--- In Christopher Friedt <> wrote:
>
> Why don't you simply use one of the existing sets of instructions. I've
> personally written one for 2.6.19. I would suggest going with a kernel
> around 2.6.21 though because the yaffs / cvs code compiles more cleanly.
>
> You can use the exact same script I have for the 2.6.19 kernel for the
> 2.6.21 kernel, but the only difference is that you'll have to fix one
> re-define somewhere when you compile the kernel. It's not hard at all,
> just make sure you're using crosstools-0.38.
>
> Do a search on the yahoo groups site for 2.6.19 or 2.6.20.6 and you'll
> probably find some very detailed instructions. You don't need to do any
> assembler at all.
Because this is not a personal project, it's a job. I've been told to
get 2.6.18 working. I may go with 2.6.21 if that's all I can get to
work, but I'm not a hobbyist, so it's not at my discretion. As for
yaffs, I was planning on using jffs which seems to have support in the
kernel already, but I will research the difference.
thanks for your help
Chris
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|