Hi Chris --
--- In "inetd17" <> wrote:
>
> So, I downloaded a 2.6.18 kernel from kernel.org, dowloaded the
> patches from http://arm.mydatex.cz/ARM_patch/patchset/, used the
> compiler from a buildroot build.
>
> I can get the kernel onto the board (a ts7200, not a ts7250), and
try
> to boot it, but all I get is:
>
> RedBoot> load -b 0x00218000 -h 192.168.0.3 vmlinux
> Using default protocol (TFTP)
> Address offset = 0x40210000
> Entry point: 0x00218000, address range: 0x00218000-0x003fb074
> RedBoot> exec -c "console=ttyAM0,115200 root=/dev/hda1"
> Using base address 0x00218000 and length 0x001e3074
>
> ------hang forever---------
>
>
> I'm about to start debugging head.S, but I'm hoping someone might
have
> a better clue as to what's going on.
>
> thanks
> Chris
>
If this board has 64M RAM, you need to patch for 'discontig RAM'.
See http://tech.groups.yahoo.com/group/ts-7000/message/5497
for more details.
Regards, ...... Charlie
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|