[ts-7000] linux 2.6.18 on a ts-7200

["inetd17" <>]

So, I downloaded a 2.6.18 kernel from kernel.org, dowloaded the
patches from http://arm.mydatex.cz/ARM_patch/patchset/, used the
compiler from a buildroot build.

I can get the kernel onto the board (a ts7200, not a ts7250), and try
to boot it, but all I get is:

RedBoot> load -b 0x00218000 -h 192.168.0.3 vmlinux
Using default protocol (TFTP)
Address offset = 0x40210000
Entry point: 0x00218000, address range: 0x00218000-0x003fb074
RedBoot> exec -c "console=ttyAM0,115200 root=/dev/hda1"
Using base address 0x00218000 and length 0x001e3074

------hang forever---------


I'm about to start debugging head.S, but I'm hoping someone might have
a better clue as to what's going on.

thanks
Chris



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/