>
?...?.f..~f.???f...?.x?.x...?..f.`.f.f.?.x.....~????.~f.???f...?..x?.`.`...`f.f
> --------- Hangs here
>
> I did the following steps:
> - patch as per the patch_and_build script
> - run the ts7250_machine_id_fix.patch
> - copied the 2.6.19.config_working_64MB config file to .config and
> modified the following:
> CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/mtdblock1"
> - copy zImage via tftp followed by exec
>
> Any ideas where I might be going wrong ? I did the above on 2.6.19
>
Please ignore my previous post. The ep93xx-serial-uartbaud.diff patch
fixed the above problem.
Now I am able to see the 2.6.19 kernel boot. It fails with "Warning:
unable to open an initial console". This is due to lack of devpts
support as discussed in an earlier thread
(http://tech.groups.yahoo.com/group/ts-7000/message/5668).
I will try loading the rootfs via nfs with a rootfs that works with 2.6.
Thanks again for all the replies. Here are my compilation steps so far
for 2.6.19 - ts7250
1. crostools-0.38 [gcc-3.4.4-glibc-2.3.2]
2. Follow steps from
http://vaiprime.visibleassets.com/~cfriedt/linux-2.6.19-ts7xxx.txt
2a) get linux-2.6.19
2b) run the patches from patch_and_build.sh
2c) change .config file CMDLINE options if need be
3. apply ts7250_machine_id_fix.patch
4. apply ep93xx-serial-uartbaud.diff
5. download yaffs2 and run the yaffs2 setup script to compile kernel
with yaffs2 support
6. compile kernel
-siddharth
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|