--- In Petr Stetiar <> wrote:
>
> siddh_c <> [2007-07-30 04:13:51]:
>
> > /tmp/cc6LAzFe.s: Assembler messages:
> > /tmp/cc6LAzFe.s:3018: Error: .err encountered
> > make[1]: *** [mm/page_alloc.o] Error 1
> > make: *** [mm] Error 2
>
> Is this error message complete? I don't think so.
> As it's assembler error, are you sure you're using ARM assembler from
> crosscompiler and not assembler for your host(x86)?
>
> > I'm using arm-gcc 3.3.4 (compiled out of crosstools).
>
> I would recommend you to use gcc 4.X at least.
I was using the cross compiler and assembler. However, the version was
an older one. I am able to compile now using newer version (using
crosstools-0.38).
> That's why it's named also. You can use[1] instead.
>
>
> 1. http://ynezz.ibawizard.net/ts7250/ts7250_machine_id_fix.patch
>
I tried this patch. The kernel hangs after Uncompressing Linux
message. Any ideas as to what I maybe doing wrong ?
----
RedBoot> load -r -b 0x00218000 -h 192.168.1.104 zImage
Using default protocol (TFTP)
Raw file loaded 0x00218000-0x0034ccfb, assumed entry at 0x00218000
RedBoot> go 0x00218000
Uncompressing
Linux.............................................................
----
Nothing comes after this.
thanks,
-siddharth
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|