[ts-7000] Re: linux 2.6 on ts7250

["siddh_c" <>]

> >
> > I also tried the steps given at an earlier thread -
> > http://tech.groups.yahoo.com/group/ts-7000/message/5497
> >
> > The first nF bit patch, serial uartbaud works, but the Machine ID fix
> >   fails (http://svn.wantstofly.org/kernel/local.diff). There seems to
> > be no file in arch/arm/common/npe.c in the vanilla 2.6.22 kernel. Is
> > there some other arm related patch that I am missing ?
> >
> > thanks in advance,
> > -siddharth
> 
> the patches at http://arm.mydatex.cz/ARM_patch/patchset/ worked for
me...
> 
I tried the patchset from http://arm.mydatex.cz/ARM_patch/patchset/ on
Linux 2.6.21.4. However, one of the patch, arch_TS7250.patch, did not
apply on 2.6.21. Looks like it was written for 2.6.18. With the rest
of the patches, I am able to compile a kernel image, but it does not
boot. 
---
RedBoot> load -r -b 0x00218000 -h 192.168.1.104 zImage               
          
Using default protocol (TFTP)                                        
          
Raw file loaded 0x00218000-0x003301d7, assumed entry at 0x00218000   
          
RedBoot> exec -c "console=ttyAM0,115200 root=/dev/mtdblock1"         
          
Using base address 0x00218000 and length 0x001181d8                  
          
--- Hangs at this point 

Is there something I am missing here ? I used the defaults suggested
by make menuconfig. Do you happen to have a .config file for ts7250
that I could use and also the arch_TS7250.patch for 2.6.21 ? 

thanks,
-siddharth




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/