> I fixed the typo that you found. Did you modify the .config at all
> before compiling? I just tried that script again and I didn't run into
> any issues.
No, I did not modify the .config file.
> You might want to try the toolchain on Yan Seiner's site. It's using
> gcc-3.4.4, a slightly more recent glibc, etc. I'm not even sure if I
> tried compiling the 2.6 kernel with TS's toolchain, but I might have
> just started using the crosstool-0.38 package below right away.
>
> http://www.seiner.com/ts7000/index.php/CrossCompileTools
> http://www.seiner.com/ts7000/crosstool-0.38.tar.bz2
>
Installing crostools-0.38 worked. I am able to compile a kernel with
gcc-3.4.4 and glibc-2.3.2. Thanks for the suggestions.
Now when I boot I get the following message:
---
Error: unrecognized/unsupported machine ID (r1 = 0x00000001).
Available machine support:
ID (hex) NAME
0000021a Cirrus Logic EDB9302 Evaluation Board
000001c3 Cirrus Logic EDB9312 Evaluation Board
000001cf Cirrus Logic EDB9315 Evaluation Board
00000304 Cirrus Logic EDB9315A Evaluation Board
000003be Glomation GESBC-9312-sx
000002a1 Technologic Systems TS-72xx SBC
Please check your kernel config and/or bootloader.
Do I have to apply the machine-id patch suggested in the previous post ?
thanks,
-siddharth
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|