--- In "Chris May" <> wrote:
>
> I just got a ts7300 and a ts-bat3 module. I flashed the card with the
> fastboot image and resized it. Everything was fine. Still no flashboot
> when i remove jumper 6 .... it just sits there blinking like it is
> loading but nothing loads. So I placed jumper 6 back in and logged in.
>
> Now the bat3 module and the LCd display do not work. I loaded tsuart0,
> tsuart-bat3 and ts7300fb modules in linux and still no luck. When I
> use the included program lcdmesg, random junk appears on the screen.
> When i try to use bat3 it tells me it cannot open /dev/ttyT3S0. I am
> an avid linux user and so im pretty sure this is either a module that
> is not loaded or a config is not set to tell it i am on a 7300 board
> and not something else.
>
>
> Please Help
>
Ok ... i solved the bat3 errors and lcd errors by using dmesg and ln
-s a dev file. But I still cannot fastboot .... I used the fastboot
256 dd file to flash and resized the drive to full size and applied
the patch as per the fastboot instuructions, yet when I remove jumper
6 it just idles at the echnologic screen with a blinking cursor... Any
ideas?
~ Chris
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|