I just got a ts7300 and a ts-bat3 module. I flashed the card with the
fastboot image and resized it. Everything was fine. Still no flashboot
when i remove jumper 6 .... it just sits there blinking like it is
loading but nothing loads. So I placed jumper 6 back in and logged in.
Now the bat3 module and the LCd display do not work. I loaded tsuart0,
tsuart-bat3 and ts7300fb modules in linux and still no luck. When I
use the included program lcdmesg, random junk appears on the screen.
When i try to use bat3 it tells me it cannot open /dev/ttyT3S0. I am
an avid linux user and so im pretty sure this is either a module that
is not loaded or a config is not set to tell it i am on a 7300 board
and not something else.
Please Help
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|