ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: CF Drive not ready Ts-7200

To:
Subject: Re: [ts-7000] Re: CF Drive not ready Ts-7200
From: Jason Stahls <>
Date: Sat, 26 May 2007 21:39:37 -0400
The DriveReady bit is normal (I think) mine does it too.  The file 
system check doesn't look right tho, I don't get that.  Check the card 
on another Linux box and verify the filesystem.

Jason

fabianmejia wrote:
> Hi Jason,
>
> Thanks a lot for your help.
>
> I followed the steps you mention and yes, it worked .... but
> partially. After some fights with fconfig (I din't have the jp3
> plugged :S) I did make the system boot from the CF, but the following
> happens:
>
> 1. Still shows that message:
> hda: task_no_data_intr: status=0x58 { DriveReady SeekComplete
> DataRequest }
>
> hda: 989856 sectors (507 MB) w/1KiB Cache, CHS=982/16/63
> Partition check:
>  /dev/ide/host0/bus0/target0/lun0:hda: status error: status=0x58 {
> DriveReady SeekComplete DataRequest }
>
>
> 2. At the end, I get this message:
>  ===================
> /dev/hda1 has gone 49710 days without being checked, check forced.
> Pass 1: Checking inodes, blocks, and sizes
> Pass 2: Checking directory structure                                 
>          
> Pass 3: Checking directory connectivity                              
>          
> Pass 3A: Optimizing directories
> Pass 4: Checking reference counts                                    
>          
> Pass 5: Checking group summary information                           
>          
>                                                                      
>          
> /dev/hda1: ***** FILE SYSTEM WAS MODIFIED *****
> /dev/hda1: ***** REBOOT LINUX *****
> /dev/hda1: 13989/123952 files (0.4% non-contiguous), 226672/494800 blocks
>
> fsck corrected errors on the root partition, but requested that
> the system be rebooted (exit code 3).
>  =====================
>
> After checking, system reboots and goes to this part again and again
> (Everytime it reboots it says it has to check the disk again, and reebot)
>
> What do you think? Is there anything wrong with the CF? Is there
> anyway to fix it? (I already tried fsck, but after fixed in my PC, it
> still doesn't work in card: 4000 days without being checked???)
>
> Regards


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU