> Hello. I am having problems using the third com port on a 7260.
> (/dev/ttyTS0).
>
> I need to open a serial port at 300 or 2400 baud for my application. It
> works perfectly on
> COM1 and COM2 (/dev/ttyAM0, /dev/ttyAM1) and on 5 or 6 7250's that I have
> used.
>
> I can run /sbin/getty -L 2400 /dev/ttyTS0, and it works, but if I try to
> run getty at 300 baud,
> I don't get the login prompt. Getty at 115200 is fine; it just seems to
> be low speeds that
> don't work.
>
> Is there something strange and limited about ttyTS0? (The answer YES
> doesn't really help!)
>
Due to the compact design only 7 baud rates are available in the TS-UART
serial ports. (You can distinguish this type of serial port from other types
by the "TS" somewhere in the device name). The baud rates supported are:
2400
4800
9600
19200
38400
57600
115200
If you need a different baud rate substitution is possible; please contact
Technologic directly for more details and to discuss your needs.
Regards,
Michael
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|