Hi Jim,
I use the TS-7250 to control a lot of different hardware, for example,
Toll System, Access Control System, Speed Control System, some support
to Brazilian and Germany Space programs, armored cars(Police)...
Ratchet, cameras, roulettes, doors, oven (steel company), elevators and
etc.. So, my question are, snmp works fine with TS-7250 ? Is snmp the
best solution to monitor these hardwares connect to it or need I to
develop a proprietary solution ?
In others words, I would like to check the status of my hardware and act
if any problem occurs, using snmp or anything.
Regards,
GC
Jim Jackson wrote:
>
>
>
> On Fri, 18 May 2007, Guilherme Cantisano wrote:
>
> > Is SNMP the better protocol/solution to monitor a TS-7250 device ? Any
> > recommendation ?
>
> How long is a piece of string?
>
> SNMP is _A_ way to provide data for monitoring - there are loads of
> others. As you give very little indication of what you want to monitor,
> what you are going to use to monitor it or anything, I'm at a loss of what
> to advise.
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|