--- In "Rob" <> wrote:
>
> --- In "gebbet" <gebbet@> wrote:
> >
> > Hi. I've tried to do my job before posting, but can't find specific
> > information about this. My problem is:
> >
> > I need to acquire data via serial ports with a TS-7400. But none of
> > the ports present in 40 pin header seem to work. If I feed signal to
> > pin 8 of 26-pin header, I can recive it as /dev/ttyAM0, but pin 23 of
> > 40-pin header won't produce any input in any device. 7400's info is
> > pretty confusing regarding ports naming. Are there C code examples I
> > could use?
> > Thanks in advance
> >
> Reading the preliminary docs I see pins 19-25 as the UARTS on the 40
pin and 7-8 on the 26
> pin. When I was using the UARTS on the 7200 and having issues with
input it was due to the
> speed being incorrect.
>
> Search on GPS and there is some code in the thread that works for me
on a 7200. Hope that
> gives you some help.
>
Thanks. It happens I was forgetting to enable pins as UART at
0x1200_0000 register. Newbie problems
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|