--- In "gebbet" <> wrote:
>
> Hi. I've tried to do my job before posting, but can't find specific
> information about this. My problem is:
>
> I need to acquire data via serial ports with a TS-7400. But none of
> the ports present in 40 pin header seem to work. If I feed signal to
> pin 8 of 26-pin header, I can recive it as /dev/ttyAM0, but pin 23 of
> 40-pin header won't produce any input in any device. 7400's info is
> pretty confusing regarding ports naming. Are there C code examples I
> could use?
> Thanks in advance
>
Reading the preliminary docs I see pins 19-25 as the UARTS on the 40 pin and
7-8 on the 26
pin. When I was using the UARTS on the 7200 and having issues with input it
was due to the
speed being incorrect.
Search on GPS and there is some code in the thread that works for me on a 7200.
Hope that
gives you some help.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|