> On Sun, 2007-04-22 at 15:47 -0400, Colin Copeland wrote:
> I noticed I was setting the wrong bit on the TS-7400 control
> register. Doing a peek8 on the control register looks good now:
>
> :eeapnode# peek8 0x12000000
> 0x2
>
> Here's my updated kernel module code:
> http://cs.earlham.edu/~eeap/cvsweb/cvsweb.cgi/eeapnode/module/
http://cs.earlham.edu/~eeap/cvsweb/cvsweb.cgi/eeapnode/module/>
> eeapnode.c?rev=1.2
>
> But, I'm still failing to receive any interrupts on DIO 11. /proc/
> interrupts and /proc/stat never record interrupts on IRQ 33.
Wow...what timing. This seems to be almost exactly what I need. My application
requires counting pulses on pin 8 of the DIO1 header (bit 0 of PortF, IIRC). I
was thinking about using a kernel module to handle the interrupts and let me
watch the IRQ count via a /proc entry.
I'll take a closer look at the module code and the EP9302 documentation to see
what changes I need to make to handle interrupts on the pin I need to watch.
--
Cheers!
Kevin.
http://www.ve3syb.ca/ |"What are we going to do today, Borg?"
Owner of Elecraft K2 #2172 |"Same thing we always do, Pinkutus:
| Try to assimilate the world!"
#include <disclaimer/favourite> | -Pinkutus & the Borg
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|