On Sun, 2007-04-22 at 15:47 -0400, Colin Copeland wrote:
> Hey guys,
>
> I noticed I was setting the wrong bit on the TS-7400 control
> register. Doing a peek8 on the control register looks good now:
>
> :eeapnode# peek8 0x12000000
> 0x2
>
> Here's my updated kernel module code:
> http://cs.earlham.edu/~eeap/cvsweb/cvsweb.cgi/eeapnode/module/
> eeapnode.c?rev=1.2
>
> But, I'm still failing to receive any interrupts on DIO 11. /proc/
> interrupts and /proc/stat never record interrupts on IRQ 33.
>
> Hey, I forgot to thank you Eddie in my last message, but your pointer
> to the end of the documentation was a big help.
I am also seeing this same problem, did you ever find a resolution?
--
David L. Martin
)/_
_.--..---"-,--c_
\L..' ._O__)_
,-. _.+ _ \..--( /
`\.-''__.-' \ ( \_
`''' `\__ /\
')
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|