On Wed, 2007-05-16 at 11:13 -0700, Eddie Dawydiuk wrote:
> Hello,
>
> >> I noticed I was setting the wrong bit on the TS-7400 control
> >> register. Doing a peek8 on the control register looks good now:
> >>
> >> :eeapnode# peek8 0x12000000
> >> 0x2
> >>
> >> Here's my updated kernel module code:
> >> http://cs.earlham.edu/~eeap/cvsweb/cvsweb.cgi/eeapnode/module/
> >> eeapnode.c?rev=1.2
> >>
> >> But, I'm still failing to receive any interrupts on DIO 11. /proc/
> >> interrupts and /proc/stat never record interrupts on IRQ 33.
> >>
> >> Hey, I forgot to thank you Eddie in my last message, but your
> pointer
> >> to the end of the documentation was a big help.
> >
> > I am also seeing this same problem, did you ever find a resolution?
>
> There was a problem discovered with the firmware on the TS-7400 with
> regard to DIO_11 not properly generating interrupts when it was
> configured as an external IRQ. A new revision of the firmware was
> released on May 10 that resolves this issue. Please contact me off
> list
> and I can get you an RMA to return your board to be reprogrammed as
> the
> firmware is not field upgradable.
grumble, grumble, grumble, you have no idea how long I hunted for that
bug :)
--
David L. Martin
)/_
_.--..---"-,--c_
\L..' ._O__)_
,-. _.+ _ \..--( /
`\.-''__.-' \ ( \_
`''' `\__ /\
')
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|