you likely haven't inserted the pcipool.o modules, or mounted usbfs,
etc.... just scrounge the list archives for mention of those. I gave a
small script to do all of it.
~/Chris
oj199933 wrote:
> Hello,
>
> I've just received my TS-7400 board and now I work my way trough the
> manual (linuxarm-guide-rev2.2). Most of the stuff is working fine.
> I've already internet access via ethernet and I downloaded the zd.o
> module.
> I've used insmod to load the module along with the other modules
> mentioned in chapter 6.7. So far so good. But the next step; "ifconfig
> wlan0 up" doesn't work (SIOCGIFFLAGS: No such device).
> I've tried to copy the file ifcfg-eth0 to a file named ifcfg-wlan0
> (and then changed the first line to 'DEVICE=wlan0').
> Unfortunately, that was not enough. I'm out of ideas for the moment.
> Who can help me with the next steps?
>
> Thanks in advance!
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|