Hello,
> I've just received my TS-7400 board and now I work my way trough the
> manual (linuxarm-guide-rev2.2). Most of the stuff is working fine.
> I've already internet access via ethernet and I downloaded the zd.o
> module.
> I've used insmod to load the module along with the other modules
> mentioned in chapter 6.7. So far so good. But the next step; "ifconfig
> wlan0 up" doesn't work (SIOCGIFFLAGS: No such device).
The error indicates there is no such network interface. Can you send me
the output of dmesg. The USB wireless devices we sell were recently
upgraded to revision B of the Zydas ZD1211 chipset. As a result we have
a new driver available here
ftp://oz.embeddedarm.com/wireless/zd1211/r83/ts7400/zdb.o
--
Best Regards,
______________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|