ts-7000
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[ts-7000] serial_blaster with ts-7250 nand2k

from [mowik] [Permanent Link][Original]
To:
Subject: [ts-7000] serial_blaster with ts-7250 nand2k
From:
Date: Thu, 10 May 2007 14:10:13 +0200 (CEST) 
hello,

i bricked some time ago my ts-7250-nand2k bootrom, i got serial_blaster
and changed the redboot.bin with the one from
ftp://ftp.embeddedarm.com/images/redboot/redboot-7250-128mb2k-1.00.bin

it boots now from serial_blaster, but i can't hold in redboot, it allways
executes the boot script and loads the kernel, i tryed to run
serial_blaster and just after it sended redboot.bin i stop it and start
imeaditly minicom and send a ^C to stop the bootprocess, but i'm allways
to slow, so i can only boot into linux, is there a way to rewrite the
bootrom from linux, or any other idea what i can do to repair my board.

thanks mowik


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [ts-7000] Re: sample code wifi application, oj199933
Next by Date:  RE: [ts-7000] serial_blaster with ts-7250 nand2k, Curtis Monroe
Previous by Thread:  [ts-7000] Re: sample code wifi application, oj199933
Next by Thread:  RE: [ts-7000] serial_blaster with ts-7250 nand2k, Curtis Monroe
Indexes:  [Date] [Thread] [Top] [All Lists]
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU