To: | |
---|---|
Subject: | Re: [ts-7000] LED's are flashing on power-up |
From: | Kevin Cozens <> |
Date: | Mon, 07 May 2007 16:14:09 -0400 |
Breton M. Saunders wrote: > The EP93XX masked rom does this when it cannot find a correct bootstrap > source. Thanks for the reply, Breton. I have downloaded the serial-blaster package. I will set that up on my old machine and see if I can get the board running again. (My new machine doesn't have a serial port.) I suspect a problem in the EEPROM. -- Cheers! Kevin. http://www.ve3syb.ca/ |"What are we going to do today, Borg?" Owner of Elecraft K2 #2172 |"Same thing we always do, Pinkutus: | Try to assimilate the world!" #include <disclaimer/favourite> | -Pinkutus & the Borg Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/ts-7000/join (Yahoo! ID required) <*> To change settings via email: <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [ts-7000] Using crosstools-0.48 to build gcc-3.3.4 glibc-2.3.2?, Kevin Cozens |
---|---|
Next by Date: | Re: [ts-7000] Using crosstools-0.48 to build gcc-3.3.4 glibc-2.3.2?, David Hawkins |
Previous by Thread: | Re: [ts-7000] LED's are flashing on power-up, Breton M. Saunders |
Next by Thread: | [ts-7000] I2S on 7260?, pgb_psu |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU