>> > I figured out that gcc-3.3.4 and glibc-2.3.2 were the
>> > sanctioned versions for the ts11 kernel on the TS-7300, so
>>
>> We didn't apply any patches other than those applied by the crosstool
>> scripts. I believe that was the naming convention used when we built
>> this toolchain.
>
> The cross-compiler tools I'm using are based on version 4.0.1 of gcc. It
> tosses up various errors when trying to compile the ts11 kernel. With a couple
> of small patches to the kernel source I was able to get to where I could build
> the printer.o module but installing the module taints the kernel.
Whats the output from insmod?
--
Best Regards,
______________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|