Hello,
> I figured out that gcc-3.3.4 and glibc-2.3.2 were the
> sanctioned versions for the ts11 kernel on the TS-7300, so
> I went off and got the latest crosstools-0.48 package. I
> noticed that demo-arm.sh did not list gcc-3.3.4-glibc-2.3.2
> as a possible option. I added it to the file, and it built
> fine under Cygwin.
>
> I noticed in the FTP files, and in the link you mention above,
> that the Linux name of the same tool set ends in
>
> -0.28rc39
>
> I haven't built the tools under Linux yet. I was wondering
> if the name difference is due to a patch that crosstools
> applies, or is something that TS found they had to add to
> the cross-tools build to get things working.
We didn't apply any patches other than those applied by the crosstool
scripts. I believe that was the naming convention used when we built
this toolchain.
--
Best Regards,
______________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|