--- In David Hawkins <> wrote:
>
> paramod1 wrote:
> > Hi..
> >
> > Anyone can help..
> > I just purchased TS7300 and tried to get into Redboot command
window
> > using the key hitting which is mentioned in the mannual, but
> > evrerytime it goes to Linux kernel instead of going to redboot.
> > I tried many times but failed..
>
> You have to read the manual very carefully.
>
> The TS-7300 boots directly off the SD card ...
> well, it bootstraps using the on-chip EEPROM, then boots
> using the SD card.
>
> RedBoot is not used.
>
> The TS manual's could be a little clearer ... I banged
> on the serial port a few times looking for the Redboot
> prompt before I went back and read the manual again ...
>
> Dave
>
Hi Dave,
Thanks..
There is a mannual "getting stated" comes with the TS7300 SBC.
In that mannual, i found that to get into the RedBoot command
prompt , we need to hit "Ctrl+C" within one sec ( as soon as the
power is on). and I tired but could not get .
By the way,How can we load or transfer files to SBS ?
What I understand is that we need to get into the redboot command
prompt and use Zmodem or TFTP or FTTP. Is it the correct way?
Paramod...
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|