| To: | |
|---|---|
| Subject: | [ts-7000] Cannot get into RedBoot command (TS7300) |
| From: | "paramod1" <> |
| Date: | Thu, 03 May 2007 01:19:00 -0000 |
Hi..
Anyone can help..
I just purchased TS7300 and tried to get into Redboot command window
using the key hitting which is mentioned in the mannual, but
evrerytime it goes to Linux kernel instead of going to redboot.
I tried many times but failed..
Thanks..
Paramod1
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] Dear TS: Any word on when Debian Etch image for the ts-7300 will be available?, Eddie Dawydiuk |
|---|---|
| Next by Date: | Re: [ts-7000] Cannot get into RedBoot command (TS7300), David Hawkins |
| Previous by Thread: | Re: [ts-7000] Dear TS: Any word on when Debian Etch image for the ts-7300 will be available?, Eddie Dawydiuk |
| Next by Thread: | Re: [ts-7000] Cannot get into RedBoot command (TS7300), David Hawkins |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU