Hmm... I wouldn't suggest 2.6.18 if you want to use yaffs. If you are
going to use it, then use an older, non-current, version from cvs. They
had to change data structures around for block_dev and node after 2.6.19.
Luis Ortega wrote:
> I share your interest in this. Now that Debian 4.0 (Etch) is stable it
> is time to move away from a 2.4 kernel. What I am not sure is to which
> kernel. I have heard that there were substantial changes between 2.6.16
> and 2.6.19(?) and I wonder if Etch choice of 2.6.18 is what we could use
> as a basis. I more than welcome comments.
>
> ashandore wrote:
>> In attempting to get this working I have scoured both this forum and
>> the internet to find
>> scattered information as to kernel configurations and patches that
>> will work with the 7200.
>> While I'm sure all the information I need is there, I'm having a
>> difficult time discerning what a
>> working kernel requires. Can somebody point me towards the patches I
>> should be using anda
>> good kernel .config in order to get as close to a fully working 2.6
>> kernel as possible?
>>
>> Thanks,
>> George
>>
>>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|