Thank you Jim,
I've load this modules and the wvdial connects !!
:-)
--- In Jim Jackson <> wrote:
>
>
>
>
> On Tue, 13 Mar 2007, javipapi2005 wrote:
>
> > Dear Friends,
> >
> > I'm making an application on TS7260 and I want to connect USBModem
> > with wvdial. When wvdial executes pppd, this exit by error code 1:
> >
> > _________________________________________
> >
> > PPP generic driver version 2.4.2
> > --> Disconnecting at Tue Mar 13 08:37:01 2007
> > --> The PPP daemon has died: Fatal pppd error (exit code = 1)
> > --> man pppd explains pppd error codes in more detail.
> > --> Try again and look into /var/log/messages and the wvdial and
> > pppd man pages for more information.
> > _________________________________________
>
> Have you got the ppp modules loaded?
>
> slhc
> ppp_generic
> ppp_async
>
> maybe others depending on setup.
>
>
> >
> >
> > In pppd man pages the exit code 1 says:
> >
> > _________________________________________
> >
> > 1 An immediately fatal error of some kind occurred,
> > such as an essential system call failing, or run
> > ning out of virtual memory.
> > _________________________________________
> >
> >
> > I'm looking for some response for this error, whitout having luck.
> > I'ts error only in a USB Modems?
> > Can someone help me?
> >
> > Thank You,
> > Javier Gonzàlez.
> >
> >
> > I put the sequence I use:
> >
> > 0. System information:
> > ___________________________________________
> > Linux ts7200 2.4.26-ts11 #22 Tue Jun 6 12:23:09 MST 2006 armv4l
unknown
> > ___________________________________________
> >
> >
> > 1. To see the usb bus
> > ___________________________________________
> > ts7200:~# more /proc/bus/usb/devices
> >
> > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
> > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> > P: Vendor=0000 ProdID=0000 Rev= 0.00
> > S: Product=USB OHCI Root Hub
> > S: SerialNumber=e0020000
> > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> > P: Vendor=0781 ProdID=5150 Rev= 0.10
> > S: Manufacturer=SanDisk Corporation
> > S: Product=Cruzer Mini
> > S: SerialNumber=200515364209DD620431
> > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
> > Driver=usb-storage
> > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
> > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> > P: Vendor=12d1 ProdID=1003 Rev= 0.00
> > S: Manufacturer=HUAWEI Technologies
> > S: Product=HUAWEI Mobile
> > C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
> > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
> > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> > E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > I: If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
> > Driver=usb-storage
> > E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > ___________________________________________
> >
> >
> > 2. To modify to USB serial mod.
> > ___________________________________________
> > ts7200:~# modprobe usbserial vendor=0x12d1 product=0x1003
> >
> > usb.c: registered new driver serial
> > usbserial.c: USB Serial support registered for Generic
> > usbserial.c: Generic converter detected
> > usbserial.c: Generic converter now attached to ttyUSB0 (or usb/tts/0
> > for devfs)
> > usbserial.c: Generic converter detected
> > usbserial.c: Generic converter now attached to ttyUSB1 (or usb/tts/1
> > for devfs)
> > usbserial.c: USB Serial Driver core v1.4
> > ___________________________________________
> >
> > 3. The usb bus now:
> > ___________________________________________
> > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
> > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> > P: Vendor=0000 ProdID=0000 Rev= 0.00
> > S: Product=USB OHCI Root Hub
> > S: SerialNumber=e0020000
> > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> > P: Vendor=0781 ProdID=5150 Rev= 0.10
> > S: Manufacturer=SanDisk Corporation
> > S: Product=Cruzer Mini
> > S: SerialNumber=200515364209DD620431
> > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
> > Driver=usb-storage
> > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
> > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> > P: Vendor=12d1 ProdID=1003 Rev= 0.00
> > S: Manufacturer=HUAWEI Technologies
> > S: Product=HUAWEI Mobile
> > C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
> > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
> > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
> > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
> > E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > I: If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
> > Driver=usb-storage
> > E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > ___________________________________________
> >
> > 4. The /etc/wvdial.conf file
> > ___________________________________________
> > [Dialer Defaults]
> > Phone = *99***1#
> > Username = vodafone
> > Password = vodafone
> > Stupid Mode = 1
> > Dial Command = ATDT
> >
> > [Dialer vodafone]
> > Modem = /dev/usb/tts/0
> > Baud = 460800
> > Init2 = ATZ
> > Init3 = ATQ0V1E1S0=0&C1&D2+FCLASS=0
> > ISDN = 0
> > Modem Type = Analog Modem
> >
> > [Dialer internet]
> > init3 = AT+CGDCONT=1,"IP","ac.vodafone.es";
> > ___________________________________________
> >
> > 5. The connection
> > ___________________________________________
> > ts7200:~# wvdial vodafone internet
> >
> > --> WvDial: Internet dialer version 1.54.0
> > --> Cannot get information for serial port.
> > --> Initializing modem.
> > --> Sending: ATZ
> > ATZ
> > OK
> > --> Sending: ATZ
> > ATZ
> > OK
> > --> Sending: ATQ0V1E1S0=0&C1&D2+FCLASS=0
> > ATQ0V1E1S0=0&C1&D2+FCLASS=0
> > OK
> > --> Modem initialized.
> > --> Sending: ATDT*99***1#
> > --> Waiting for carrier.
> > ATDT*99***1#
> > CONNECT
> > --> Carrier detected. Starting PPP immediately.
> > --> Starting pppd at Tue Mar 13 08:36:59 2007
> > --> pid of pppd: 394
> > CSLIP: code copyright 1989 Regents of the University of California
> > PPP generic driver version 2.4.2
> > --> Disconnecting at Tue Mar 13 08:37:01 2007
> > --> The PPP daemon has died: Fatal pppd error (exit code = 1)
> > --> man pppd explains pppd error codes in more detail.
> > --> Try again and look into /var/log/messages and the wvdial and
> > pppd man pages for more information.
> > --> Auto Reconnect will be attempted in 5 seconds
> > --> Cannot get information for serial port.
> > --> Initializing modem.
> > --> Sending: ATZ
> > --> Sending: ATQ0
> > --> Re-Sending: ATZ
> > ___________________________________________
> >
> >
> >
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
See what's inside the new Yahoo! Groups email.
http://us.click.yahoo.com/0It09A/bOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|