On Tue, 13 Mar 2007, javipapi2005 wrote:
> Dear Friends,
>
> I'm making an application on TS7260 and I want to connect USBModem
> with wvdial. When wvdial executes pppd, this exit by error code 1:
>
> _________________________________________
>
> PPP generic driver version 2.4.2
> --> Disconnecting at Tue Mar 13 08:37:01 2007
> --> The PPP daemon has died: Fatal pppd error (exit code = 1)
> --> man pppd explains pppd error codes in more detail.
> --> Try again and look into /var/log/messages and the wvdial and
> pppd man pages for more information.
> _________________________________________
Have you got the ppp modules loaded?
slhc
ppp_generic
ppp_async
maybe others depending on setup.
>
>
> In pppd man pages the exit code 1 says:
>
> _________________________________________
>
> 1 An immediately fatal error of some kind occurred,
> such as an essential system call failing, or run
> ning out of virtual memory.
> _________________________________________
>
>
> I'm looking for some response for this error, whitout having luck.
> I'ts error only in a USB Modems?
> Can someone help me?
>
> Thank You,
> Javier Gonzàlez.
>
>
> I put the sequence I use:
>
> 0. System information:
> ___________________________________________
> Linux ts7200 2.4.26-ts11 #22 Tue Jun 6 12:23:09 MST 2006 armv4l unknown
> ___________________________________________
>
>
> 1. To see the usb bus
> ___________________________________________
> ts7200:~# more /proc/bus/usb/devices
>
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB OHCI Root Hub
> S: SerialNumber=e0020000
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0781 ProdID=5150 Rev= 0.10
> S: Manufacturer=SanDisk Corporation
> S: Product=Cruzer Mini
> S: SerialNumber=200515364209DD620431
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
> Driver=usb-storage
> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=12d1 ProdID=1003 Rev= 0.00
> S: Manufacturer=HUAWEI Technologies
> S: Product=HUAWEI Mobile
> C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I: If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
> Driver=usb-storage
> E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> ___________________________________________
>
>
> 2. To modify to USB serial mod.
> ___________________________________________
> ts7200:~# modprobe usbserial vendor=0x12d1 product=0x1003
>
> usb.c: registered new driver serial
> usbserial.c: USB Serial support registered for Generic
> usbserial.c: Generic converter detected
> usbserial.c: Generic converter now attached to ttyUSB0 (or usb/tts/0
> for devfs)
> usbserial.c: Generic converter detected
> usbserial.c: Generic converter now attached to ttyUSB1 (or usb/tts/1
> for devfs)
> usbserial.c: USB Serial Driver core v1.4
> ___________________________________________
>
> 3. The usb bus now:
> ___________________________________________
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB OHCI Root Hub
> S: SerialNumber=e0020000
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0781 ProdID=5150 Rev= 0.10
> S: Manufacturer=SanDisk Corporation
> S: Product=Cruzer Mini
> S: SerialNumber=200515364209DD620431
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
> Driver=usb-storage
> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=12d1 ProdID=1003 Rev= 0.00
> S: Manufacturer=HUAWEI Technologies
> S: Product=HUAWEI Mobile
> C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
> E: Ad=85(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I: If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
> Driver=usb-storage
> E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> ___________________________________________
>
> 4. The /etc/wvdial.conf file
> ___________________________________________
> [Dialer Defaults]
> Phone = *99***1#
> Username = vodafone
> Password = vodafone
> Stupid Mode = 1
> Dial Command = ATDT
>
> [Dialer vodafone]
> Modem = /dev/usb/tts/0
> Baud = 460800
> Init2 = ATZ
> Init3 = ATQ0V1E1S0=0&C1&D2+FCLASS=0
> ISDN = 0
> Modem Type = Analog Modem
>
> [Dialer internet]
> init3 = AT+CGDCONT=1,"IP","ac.vodafone.es";
> ___________________________________________
>
> 5. The connection
> ___________________________________________
> ts7200:~# wvdial vodafone internet
>
> --> WvDial: Internet dialer version 1.54.0
> --> Cannot get information for serial port.
> --> Initializing modem.
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATZ
> ATZ
> OK
> --> Sending: ATQ0V1E1S0=0&C1&D2+FCLASS=0
> ATQ0V1E1S0=0&C1&D2+FCLASS=0
> OK
> --> Modem initialized.
> --> Sending: ATDT*99***1#
> --> Waiting for carrier.
> ATDT*99***1#
> CONNECT
> --> Carrier detected. Starting PPP immediately.
> --> Starting pppd at Tue Mar 13 08:36:59 2007
> --> pid of pppd: 394
> CSLIP: code copyright 1989 Regents of the University of California
> PPP generic driver version 2.4.2
> --> Disconnecting at Tue Mar 13 08:37:01 2007
> --> The PPP daemon has died: Fatal pppd error (exit code = 1)
> --> man pppd explains pppd error codes in more detail.
> --> Try again and look into /var/log/messages and the wvdial and
> pppd man pages for more information.
> --> Auto Reconnect will be attempted in 5 seconds
> --> Cannot get information for serial port.
> --> Initializing modem.
> --> Sending: ATZ
> --> Sending: ATQ0
> --> Re-Sending: ATZ
> ___________________________________________
>
>
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Something is new at Yahoo! Groups. Check out the enhanced email design.
http://us.click.yahoo.com/kOt0.A/gOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|