OK, thanks.
Just to make sure I understand, the SD Card dd image for the 7260 is:
fastboot-7300-sdcard-7-6-2006.dd.bz2
Then, presuming I bunzip2 the dd image, I run the following:
dd if=fastboot-7300-sdcard-7-6-2006.dd of=/dev/sdcard0/disc0/disc bs=1M
Is that correct? The 7300 vs 7260 kind of confuses me.
Thanks for your help
jw
--- In Eddie Dawydiuk <> wrote:
>
> Hello,
>
> > I have a new 7260 and a new SanDisk 2.0GB SD card and would like to
> > install a clean Debian distribution on the SD card, then set up to
> > boot and pivot to the SD card.
>
> I modified the wiki article to clarify this topic, you should see a link
> to a dd image at the bottom of the article in the Downloads section. The
> first paragraph talks about loading Debian on an SD card.
>
> > 2. Run mkfs.ext3 to create a file system on part3
>
> You'll need a custom kernel if you'd like to use an ext3 filesystem as
> the default shipping kernel from Technologics does not have ext3
> support.
>
> //Eddie
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/hOt0.A/lOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|