[ts-7000] Re: 2.6 kernel CF support

["charliem_1216" <>]

Hi Setphen --

--- In  "Stephen Brooks" <> wrote:
>
> I have the  2.6.20.1 kernel patched for pata IDE support for my CF card,
> but I get this error:
> 
>  
> 
> pata_ep93xx pata_ep93xx.0: IDE/GPIO pin conflict
> 
> pata_ep93xx: probe of pata_ep93xx.0 failed with error -22
> 
>  
> 
> Any clues?? What is error -22?

This is the -EINVAL code.

Looking through the code and the cirrus manuals, it seems that
ep93xx-pata.diff is only used  on ep9312/ep9315 chips with ide
interfaces.  There is no ide interface on the ep9302, but the
ep9312/15 seems to be configurable to use the pins either as GPIO or
ide; hence the check for a conflict.

Try reverting the ep93xx-pata patch, and use only the two
ep93xx-ts7200-cf patches.  Sorry for the confusion; as I said I've not
been down this road myself.

Regards, ....... Charlie



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Something is new at Yahoo! Groups.  Check out the enhanced email design.
http://us.click.yahoo.com/kOt0.A/gOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/