Someone posted a patch for 2KB NAND Pages.
-Curtis.
On February 21, 2007 11:08 am, wrote:
> > Hi
> >
> > Check out serial_blaster on the group file area:
> > http://tech.groups.yahoo.com/group/ts-7000/files/
> Thanks that was a big help, but i have a problem with serial_blaster, as i
> undertand it doesn't support nand2k flash, and i have nand2k on-board
> flash.
>
> i quote:
>
> Serial Blaster doesn't understand file systems like YAFFS. It just loads and
> error corrects the flash data into memory. It doesn't handle large page
sizes
> (2K), just smal page sizes (512B). But you could easily modify it!
>
>
> Is there anyone who got serial_blaster working on nand2k devices ?
>
>
> thanks
> >
> > It comes with a README but you might look around at earlier posts on
> > this list to to get an overview of what can go wrong. :)
> >
> > Good Luck
> > Per Ãberg
> >
> > wrote:
> >> Hello,
> >> I'm new to the list.
> >> Two days ago i accidently executed "tsbootrom-update" ( with no
> >> arguments
> >> ) on my ts7250 SBC,
> >> after the next reboot i woulnÂt enter RedBoot anymore, instead i get
> >> this
> >> message:
> >>
> >>>> TS-SDBOOT - built Jan 24 2007
> >>>> Copyright (c) 2006, Technologic Systems
> >>
> >> The problem is that i have no SDCard reader on my SBC, it came just with
> >> On-Board NAND Flash, which i canÂt access anymore.
> >>
> >> I saw in the manual that Jumper 1 is used for recovery boot from COM1, i
> >> tryed to enable Jumper 1 and send a Kernel ( i'm not sure what to send
> >> so
> >> i started with a kernel) with zmodem after powering up the device, but
> >> nothing happend, I looked on the mailinglist and with google but i
> >> couldn
> >> find anythink that would help me, I was also thinking about JTAG but i
> >> would need to build a cable first and i havn't seen any software for the
> >> ts7250 SBC JTAG interface, so if anyone know somethink about the JTAG
> >> Interface please tell me if i can debrick my SBC with it. thanks
> >>
> >>
> >>
> >>
> >>
> >> Yahoo! Groups Links
> >>
> >>
> >>
> >
> > --
> > Per Ãberg, Ph.D. Student
> > Address: Division of Vehicular Systems
> > Department of Electrical Engineering
> > LinkÃpings universitet
> > 581 83 LinkÃping, SWEDEN
> > Phone: +46 (0)13-28 23 69
> > e-mail:
> >
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|