Hi
Check out serial_blaster on the group file area:
http://tech.groups.yahoo.com/group/ts-7000/files/
It comes with a README but you might look around at earlier posts on
this list to to get an overview of what can go wrong. :)
Good Luck
Per Öberg
wrote:
> Hello,
> I'm new to the list.
> Two days ago i accidently executed "tsbootrom-update" ( with no arguments
> ) on my ts7250 SBC,
> after the next reboot i wouln´t enter RedBoot anymore, instead i get this
> message:
>
>>> TS-SDBOOT - built Jan 24 2007
>>> Copyright (c) 2006, Technologic Systems
>
> The problem is that i have no SDCard reader on my SBC, it came just with
> On-Board NAND Flash, which i can´t access anymore.
>
> I saw in the manual that Jumper 1 is used for recovery boot from COM1, i
> tryed to enable Jumper 1 and send a Kernel ( i'm not sure what to send so
> i started with a kernel) with zmodem after powering up the device, but
> nothing happend, I looked on the mailinglist and with google but i couldn
> find anythink that would help me, I was also thinking about JTAG but i
> would need to build a cable first and i havn't seen any software for the
> ts7250 SBC JTAG interface, so if anyone know somethink about the JTAG
> Interface please tell me if i can debrick my SBC with it. thanks
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
--
Per Öberg, Ph.D. Student
Address: Division of Vehicular Systems
Department of Electrical Engineering
Linköpings universitet
581 83 Linköping, SWEDEN
Phone: +46 (0)13-28 23 69
e-mail:
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|