--- In Eddie Dawydiuk <> wrote:
>
> Hello,
>
> >> Could you explain what conditions cause this?
> >
> > It just happened while testing the boards. I think it happens when
> > the batteries runs to low without going to suspend but we need a
> > little more testing to be sure
>
> If the voltage drops below the threshold voltage, the board will enter
> lowpower mode. Once power is reapplied the bat3 should come out of
low power
> mode, and supply 5VDC to the base board.
I'll test that explicitly tomorrow but as far as I remember it stayed
in low power mode after putting back the power.
>
> Note: The threshold voltage is 3.4V by default, it can be modified
via the
> userspace software.
So the low power mode is entered when below the threshold voltage?
>
> Do you have JP7 installed on the TS-7260?
>
Yes, we have. It was one of our first problems... :-)
> //Eddie
>
Wimpunk.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|