Also, baudrate should be 115200.
//Tech77man
--- In "prak75_2004" <> wrote:
>
> Hi,
>
> I have trouble seeing redboot messages of my TS-7250 board. I have
> jumpers 2 and 3 connected, and the power lights are on. I have
trouble
> communicating between the host computer and the microcontroller
using
> Hyperterminal in Windows through using a usb-to-serial converter.
> We've checked the usb-to-serial converter using the feedback test,
and
> we've made sure that the transmit/receive pins at the
microcontroller
> and the usb-to-serial cable end are connected properly. I'm not
sure
> what else to check to see whether the board is working or not. Can
> someone give me some suggestions?
>
> Thanks,
>
> Stanley Lee
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|