Re: [ts-7000] Re: ttyTS0 on TS-7400

[Larry <>]

Make sure you have Carrier Detect disabled as well as CTS/RTS flow control.

Larry

loupi7400 wrote:

Hello again :)

I found the entry 'TS-UART/7400 detected a
> TS-7400 board' with dmesg. Also, there is a ttyTS0 in /dev.

Alas i cannot open the port :(
I tried in C with :
device = open("/dev/ttyTS0", O_RDWR | O_NOCTTY | O_NDELAY);
I'm getting a big timeout when trying to open, then an error.

I also tried with the linux echo command :
echo 12345 > /dev/ttyTS0
I'm getting the same timeout and no output.

The echo command and the C code do work fine with ttyAM0 and ttyAM1.

I'm now going to reflash my ts-7400 with the kernel in the link you
provided.

Best Regards,

Louis-Pierre Beaumont
Software Developer
Vermac Signalisation inc.