[ts-7000] Re: ttyTS0 on TS-7400

["loupi7400" <>]

Hello again :)

I found the entry 'TS-UART/7400 detected a 
> TS-7400 board' with dmesg. Also, there is a ttyTS0 in /dev.

Alas i cannot open the port :(
I tried in C with :
  device = open("/dev/ttyTS0", O_RDWR | O_NOCTTY | O_NDELAY);
I'm getting a big timeout when trying to open, then an error.

I also tried with the linux echo command :
  echo 12345 > /dev/ttyTS0
I'm getting the same timeout and no output. 

The echo command and the C code do work fine with ttyAM0 and ttyAM1.

I'm now going to reflash my ts-7400 with the kernel in the link you 
provided.


Best Regards,

Louis-Pierre Beaumont
Software Developer
Vermac Signalisation inc.






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/