Re: [ts-7000] example serial port C code for the TS-7260

[David <>]

We are porting a UAV autopilot to the TS-7260 which does record data
from GPS, DMU etc via RS232.   Our GPS code should be the same as yours (NMEA standard).  DMU is a
Crossbow unit.   We are also nubies with the TS board.    Contact me off the board and
I will send you the code. 

David Algeo
University of West Florida
m("uwf.edu","dalgeo");">

cspin_2001 wrote:

I am a nubie to TS-7260 and starting to code up a flight data recorder
for my experimental aircraft (Rutan Vari-Viggen). I want to record
data from several instruments and sensors onboard and store it to an
SD disk for post flight analysis. The aircraft instrumentation follows

1. GPS - RS-232 4800 baud, navigation data
2. EFIS - RS-232 115k baud, Attitude info and air data computer
3. Engine computer - RS-232 9600 baud, RPM, EGT,CHT, Fuel flow,etc
4. Discretes - Gear, etc
5. A/D - aileron, rudder, elevator & reflex position.

If anyone has some code that could help me get stsrted would be great
help. Especially capturing NMEA GPS from a serial port.

Thanks
Charlie

-- 
David..........
You have been on the computer to long when,
You start tilting your head sideways to smile :-) 

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___