On Tue, 2007-01-30 at 23:37 +0000, cspin_2001 wrote:
> I am a nubie to TS-7260 and starting to code up a flight data
> recorder
> for my experimental aircraft (Rutan Vari-Viggen). I want to record
> data from several instruments and sensors onboard and store it to an
> SD disk for post flight analysis. The aircraft instrumentation follows
>
> 1. GPS - RS-232 4800 baud, navigation data
> 2. EFIS - RS-232 115k baud, Attitude info and air data computer
> 3. Engine computer - RS-232 9600 baud, RPM, EGT,CHT, Fuel flow,etc
> 4. Discretes - Gear, etc
> 5. A/D - aileron, rudder, elevator & reflex position.
>
> If anyone has some code that could help me get stsrted would be great
> help. Especially capturing NMEA GPS from a serial port.
>
> Thanks
> Charlie
This document still applies:
http://tldp.org/HOWTO/Serial-Programming-HOWTO/index.html
There are already NMEA programs for Linux, check freshmeat, its been a
while but I'm sure they are all still up there.
--
David L. Martin
)/_
_.--..---"-,--c_
\L..' ._O__)_
,-. _.+ _ \..--( /
`\.-''__.-' \ ( \_
`''' `\__ /\
')
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|