Thank you very much. As soon as I get things set properly, I should
post a message
fr000nc
--- In "Don W. Carr" <> wrote:
>
> Ok, I'll take a swing at it since nobody else has. It has been
years since I
> used rpcgen, however, I as I remember, the rpcgen generates C code,
so you
> just generate the code for both client and server, then cross-
compile the
> part that will live on the Arm. Not need to compile and run the
generator on
> the Arm itself.
>
> Let me know how that works out. I might also consider using rpc for
some
> things, but you have to assume a secured network.
>
> On 1/22/07, fr000nc <> wrote:
>
> --
> Dr. Don W. Carr
> J. G. Montenegro 2258
> Guadalajara, Mexico
> +52-333-630-0704
> +52-333-836-4500 ext 2930
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|