--- In Eddie Dawydiuk <> wrote:
>
> Hello,
>
> > We're trying to control the TS-BAT3 using the bat3 program but we
> > don't get a proper result. It looks like the batteries are charging
> > but when we remove the power, the system halts almost immediatly.
> > We're using this command:
> >
> > bat3 --on 300 --off 10 --shutdown 30 --pwm1 1 --pwm2 1 --charge 400 &
> >
> > Any suggestions on what we do wrong?
>
> We ship the TS-Bat3's with JP3 installed, if JP3 is installed the board
> will enter low power mode when the mains are disconnected. If JP3 is
> present you'll want to remove it.
>
> //Eddie
>
I'm pretty sorry to report, but we did removed the JP3.
wimpunk.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|