Re: [ts-7000] Using bat3

[Eddie Dawydiuk <>]

Hello,

> We're trying to control the TS-BAT3 using the bat3 program but we
> don't get a proper result.  It looks like the batteries are charging
> but when we remove the power, the system halts almost immediatly.
> We're using this command:
>
> bat3 --on 300 --off 10 --shutdown 30 --pwm1 1 --pwm2 1 --charge 400 &
>
> Any suggestions on what we do wrong?

We ship the TS-Bat3's with JP3 installed, if JP3 is installed the board
will enter low power mode when the mains are disconnected. If JP3 is
present you'll want to remove it.

//Eddie


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/