| To: | |
|---|---|
| Subject: | [ts-7000] EEPROM of TS-7200 |
| From: | "twhk2007" <> |
| Date: | Wed, 17 Jan 2007 01:33:59 -0000 |
Hello all!
In the TS-7200 user manaual (ts-72000-manual-rev2.2.pdf, page 28,
the section "Interpreting Cirrus A/D Converter"), it mentions that the
on-board ADC channels are calibrated. The calibration values are stored
in the EEPROM. From the schemaic of TS-7200, I can not find any
EEPROM ? Why ?
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] ts-7400: detecting presence of ts-9441?, Bas Schulte |
|---|---|
| Next by Date: | [ts-7000] NAND flash based vs NOR flash based, twhk2007 |
| Previous by Thread: | [ts-7000] What would be the best way to collect various message threads?, tech77man |
| Next by Thread: | Re: [ts-7000] EEPROM of TS-7200, Christopher Friedt |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU